Millimeter Wave Receiver IPs
mmWave (mm-Wave) receivers (RX) present many changes for development. In addition to the general receiver requirement of low noise figure (NF) and high sensitivity apply to mmWave receivers, many system (e.g. E-band backhaul) require very wide relative bandwidth. RX linearity is also both important when strong interference may present in the system and when high modulation schemes (e.g. 64-QAM) demand good EVM.
SaberTek has developed key mmWave RX IPs for various frequency band, K-band (24GHz), V-band (60GHz), E-band (71-76 and 81-86 GHz), and W-band (77GHz and 94GHz). These IP’s could be used to develop competitive mmw products for various applications such as WiGig, automotive radar, passive imaging, and E-band backhaul.
IP Name | Function | Intended Application | Technology | Frequency Band (GHz) | Datasheet Request |
Receiver (RX) | |||||
SBR_LNA_60G_T65_1 | LNA | WiGig, 802.11.ad, 802.15.3c | CMOS 65n | 57~67 |  |
SBR_LNA_60G_JSG18_1 | LNA | WiGig, 802.11.ad, 802.15.3c | SiGe 0.18u | 57~67 | |
SBR_LNA_24G_JSG18_1 | LNA | Auromotive radar | SiGe 0.18u | 23~29 | |
SBR_LNA_77G_JSG18_1 | LNA | Auromotive radar | SiGe 0.18u | 77~82 | |
SBR_LNA_94G_JSG18_1 | LNA | Passive Imager | SiGe 0.18u | 75~105 | |
SBR_RXMX_60G_T65_1 | RXMIX | WiGig, 802.11.ad, 802.15.3c | CMOS 65n | 57~66 | |
SBR_RXMX_60G_JSG18_1 | RXMIX | WiGig, 802.11.ad, 802.15.3c | SiGe 0.18u | 57~66 | |
SBR_RXMX_24G_JSG18_1 | RXMIX | Auromotive radar | SiGe 0.18u | 23~29 | |
SBR_RXMX_77G_JSG18_1 | RXMIX | Auromotive radar, E-band | SiGe 0.18u | 77~82 | |
SBR_RXFE_60G_T65_1 | LNA+RXMIX | WiGig, 802.11.ad, 802.15.3c | CMOS 65n | 57~66 | |
SBR_LPF_900M_JSG18_1 | LPF | WiGig, 802.11.ad, 802.15.3c, E-band, E-band | SiGe 0.18u | 1~900 | |
SBR_PGA_30dB_900_JSG18_1 | PGA | WiGig, 802.11.ad, 802.15.3c, E-band | SiGe 0.18u | 1~900 | |
SBR_RX_60G_JSG18_1 | Complete RX | WiGig, 802.11.ad, 802.15.3c | SiGe 0.18u | 57~67 | |
SBR_RX_94G_JSG18_1 | LNA+Detector | Passive Imager | SiGe 0.18u | 75~105 | |